Trend Reducing Ring Saw Blade Washer 30mm 20mm 1.8mm
Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only. Extra care must be taken when mounting sawblades onto a saw spindle when using bushing...
Trend Reducing Ring Saw Blade Washer 30mm 25mm 1.8mm
Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only. Extra care must be taken when mounting sawblades onto a saw spindle when using bushing...
Trend Reducing Ring Saw Blade Washer 30mm 5/8" / 15.9mm 1.4mm
Trend 30 to 15.9mm Reducing Bush - for saw blades 1.4mm thick 30mm outside diameter reducing washer with 15.9mm internal bore. Allows 30mm bore blades with 1.4mm thick plates to be fitted with compatible saws with 15.9mm spindle fittings. Accurately...
Trend Reducing Ring Saw Blade Washer 32mm 25mm 1.8mm
Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only. Extra care must be taken when mounting sawblades onto a saw spindle when using bushing...
Trend Reducing Ring Saw Blade Washer 32mm 30mm 1.8mm
Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only. Extra care must be taken when mounting sawblades onto a saw spindle when using bushing...
Trend Replacement Bearing
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 10 • Bearing Dia Metric: 32 • Sawbore: 12
Trend Replacement Bearing 1-1/8" 5/16" 1/2"
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check...
Trend Replacement Bearing 1/2" 11/64" 1/8"
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check...
Trend Replacement Bearing 1/2" 3/16" 1/4"
Trend Router Cutter Bearing - for 1/4in shank mounting High quality ball bearing for free running against an edge to prevent heat build up. 1/4in inside diameter for direct fit to router shanks and arbors. 1/2in outside diameter for matched fit to...
Trend Replacement Bearing 1/2" 3/16" 3/16"
Trend Router Cutter Bearing - for 3/16in bottom mounting High quality ball bearing for free running against an edge to prevent heat build up. 3/16in inside diameter for use on bottom mounted trimmer and profiling cutters. 1/2in outside diameter for...